Radiation Monitor 900 Series

Radiation Monitor 900 Series

Available Configurations
Type R: Monitoring High Level Dose Rates A monitor scaled over the range 0.5 to 5000 μSv h-1 (0.05 to 500 mR/h). The G-M tube is compensated to give a useful response from 45 keV to
1.5 MeV and above. It is not recommended for monitoring X-radiation from apparatus operating below 75 kVp.

Type G: Monitoring for Low Environmental Dose Rates Highly sensitive performance. The monitor is scaled over the range 0.05 to 75 μSv h-1 (0.005 to 7.5 mR/h). The useful energy range is 55 keVto 1.5 MeV and above. This instrument is not suitable for monitoring X-radiation.

Type D: A monitor using a partially compensated G-M tube to obtain an extended low energy response.
The instruments is scaled over the range of 0.5 to 1000 μSvh-1 (0.05 to 100 mR/h). The useful energy range is from 30 keV to 1.5 MeV but response is maintained down to at least 17 keV. It is suitable for measuring radiation from X-ray apparatus operating at or above 45 kVp.

Type X: This instrument is scaled 0.5 to 2000 counts per second and uses an end window G-M tube without energy compensation. It is sensitive to radiation down to 10keV and is therefore useful for locating X-ray leakage from a variety of systems including high voltage equipment where X-rays are generated adventitiously. It is not intended for measurement but as a relative check device.

An after sales Calibration service is available for this instrument


Product Enquiry

Make an enquiry

Your Name (required)

Your Email (required)

Your Phone Number (required)

How can we help you?



Weight: 1 Kg. (2.2 lbs)
Size: 180 x 110 x 165 mm (7″ x 4.5″ x 6.5″)
Batteries: 6 type AA cells, alkaline (IEC LR6) or rechargeable (IEC KR 15/51)
Battery life: Approximately 300 hours at 4 hours/day.
Paralysis time: Scale corrected to give true reading.
Meter integration time: 1 to 4 seconds set to match counting rate.
Radiation detector: Halogen quenched G-M tube.
Radiation detected: Gamma and X-rays only.
G-M tube supply: 300-700 Volts preset for tube type.
Overload protection: No meter ‘fallback’ with intensities at least 100 times full scale reading.
Main power: 12-18 V dc from mains unit.