Monitoring of deposition process for non-ferrous material on a non-ferrous substrate
Monitoring the condition of highly stressed parts
Forged/plated material detection
Make an enquiry
60 kHz, 120 kHz, 240 kHz, 480 kHz, 960 kHz.
0.5 % IACS to 110 % IACS, 0.28-64 MS/m
At 20 °C: At 10 % IACS: ±0.1 % IACS. At 100 % IACS: ±0.5 % IAC
Over Range 0-40°C: At 10% IACS: ±0.2% IACS. At 100% IACS: ±0.8% IACS
Probe in thermal equilibrium with metal.
Up to 3 decimal places
13 mm probe compensated to 0.020” (0.5mm) 7 mm probe compensated to 0.010” (0.25 mm)
In-probe sensor (accurate to 0.5 °C). Range 0 °C to + 50 °C
Automatic Temperature Compensation
Conductivity measurements are corrected to the 20°C value.
0 to 95% relative humidity, 0°C to + 50°C for reliable operation
2.8” (70mm) 320 x 240 pixels colour display. LCD with selectable backlight.
Construction & Storage
High impact, splash-proof, moulded UL94-5VA flame-retardant ABS case. Protective rubber boot to protect the unit, probes, probe cable, operator manual on USB, and removable stand.
On top of unit. Removable for value verification, and when attached ensures thermal equilibrium.
2 x 1.5 V AA NiMH Batteries, Approx up to 6 hrs life. Can also use non-rechargeable AA cells.
163mm Long x 80mm Wide x 25mm Deep
350g (0.77 pounds) including batteries
Data Logger Memory
Removable 2GB micro SD Card allowing over 1 million readings to be stored.
USB port for charger and PC communications
12.7 mm diameter for 60 kHz to 480 kHz. 7 mm probe operates at 480 kHz & 960 kHz. Probes are interchangeable with simple operator resetting procedure. Probes are field exchangeable and do not require return to manufacturer for calibration.
Settings Reference Blocks – A range of conductivity references standards traceable to US and European standards are available for in-field use. Up to five can be mounted on an aluminium anodised holding plate.