Flexible/Single Envelope Cassettes are of a similar design. They are single envelope, open at one end for loading and unloading film/screens. The open end is held closed and light sealed by means of ‘VELCRO’ nylon fastener. There is an extra finger tab at the sealed end to assist in holding the cassette to the bench for easier and quicker unloading. Closure is normally made of the shorter side of a rectangular cassette but ‘specials’, with the opening on the long side, can be supplied to order.
Standard Single Envelope Cassettes are made from 400 micron black PVC. Over the years these have become the standard cassette for industry not recommended for use in very cold weather.
Reinforced Single Envelope Cassettes are made from thin, yet strong PVC/Nylon/PVC laminated material. the Nylon reinforcement is in the form of a mesh and reduces the tendency of the PVC to split at the seams after much use.The PVC laminate retains its flexibility in cold climates and is more suitable for use at low temperatures.
One Seam Reinforced Single Envelope Cassettes are made to outlast any other flexible type of cassette. Constructed without side seams from rugged Nylon reinforced PVC, with one joint at the back of the cassette, overcoming the weakness and tendency to split experienced with other single envelope cassettes that are welded along the sides. Made from specially formulated, heavy duty, Nylon reinforced PVC coloured Black on the inside and Yellow on the outside for easy recognition.
Deavy Duty Single Envelope Cassettes are manufactured in double thickness material consisting of an internal layer of 400 micron black PVC and an external reinforced layer comprised of PVC / Nylon / PVC laminate. This combination produces a cassette capable of withstanding tough conditions at normal temperatures.
Double Envelope Cassettes consist of two plain, black envelopes without any means of closure. Film and screens are loaded into the inner envelope, the smaller of the two. This is then inserted, open end first, into the larger, outer envelope. light tightness is assured because the open end of the inner envelope is up against the closed end of outer. They are made from standard 400 micron PVC material and are clearly marked on the inner and outer envelopes for easy identification in the darkroom or on site.
Special Cassettes can be supplied to customers own requirements.
Single Envelope up to 3 metres long for pipeline work.
Available in all standard Metric and Imperial film sizes- please state size and type of cassette required when requesting a quotation
Make an enquiry
UV-EYE can be used for general part inspection with white light. Below are few sample pics of defects in general metal parts.
For any questions or queries regarding this product please contact us!
PSM5 /TAM PANEL DEGRADATION CHECK
UVA illumination at 365nm >1200μW/cm2
White light >1000 lu
Measurement accuracy better than –0.01mm
Instrument dimensions 255mm x 140mm x 30mm
Probe dimensions 150mm (l)
Case material Reinforced ABS plastic Moisture/dust tightness IP 64
Dedicated Software allows:
Recording and storing of indications
Images stored in JPEG
Measurement of indication with easy line, circle or rectangular measurement tools.
Generate reports. Pre loaded report
Report format: Tam Panel Report, Defect Report
Multilanguage support ( English, Spanish,German,Italian)
Option for touch tablet or 10.1″ notebook.
Does it come with an Initial calibration certificate?