|
NDT Products
FreeScan
N-BUS
Acoustography
MsSR 3030R
UV-A and White Light Meters
TAM/ PSM 5 Panels
Penetrants
Temperature and Humidity Data Logger
Water Spray Guns
Transparent Comparators
Wipe-off Technique Solvent Dispensers
UV Power Torch
UV 250W Hand Lamp
UV 400W Flood Lamp
TAM / PSM-5 Panel Ultrasonic Cleaners
UV Blocking Specs
Magnetic Field Meter
Magnetic Flux Indicator Strips
Magnetic Ink
Contrast Paint
White Contrast Paint Remover
Residual Magnetometers
Magnaflux Mag II
Rotating Turn Table
Rapid-I |
UV 400W FLOOD LAMP for UV fluorescence
- High irradiance blacklight for large area illumination -
Product Features
- Compact, lightweight and durable.
- Modular design for multiple UV lamp installations.
- Fan cooled for temperature management.
- 135V to UV lamp unit for added electrical safety.
- Filter glass assembly is fitted to a hinged front door,
enabling
easy access for UV bulb replacement and cleaning.
- Elapsed hour counter for service scheduling.
- Safety wire mesh over filter glass.
- Mounting bracket.
Accessories
1. Barn doors for restricting UV light beam in certain
directions.
2. 5m connecting cable extension - UV lamp unit to power supply
unit.
Technical Data
- UV light irradiance - depends on distance.
- Illumination area - depends on distance.
- Uniformity of UV light irradiance - depends on illumination
area.
- UV 400W high intensity discharge bulb: Iron doped metal halide
(ozone free)
- UV bulb useful operating life (estimated): 500 hours - depends
on age, environment, switching and cooling
- Filter glass type: Black
- Filter glass size: 180mm x 140mm x 3.25mm
- Reflector: Aluminium - UVL full spectrum grade
- Power supply requirement: 230V/50Hz or 115V/50Hz (60Hz options
available)
- Power: 410W
- Noise: < 70 dB
- Rating: IP 40
- Integral fuse protection: 2 x 6.3A miniature time lag fuses -
ceramic body 5mm x 20mm
- Thermal protection: Auto reset thermal cut out
- Construction material: Sheet aluminium
- Coating material: UV stable black polyester powder
- Connecting cable length: 2m (5m extension option)
- Weight of UV lamp unit: Approximately 2Kg
The flood lamp incorporates a high irradiance discharge 400W
iron doped metal halide UV bulb with spectral output as shown
below:
A black filter glass with a wavelength transmission range as
shown below is fitted in front of the UV bulb in order to
produce the required UV light spectral output for UV fluorescent
inspection processes.
Health and Safety
All our UV light equipment is supplied with comprehensive
operating instructions - including maximum permissible UV light
exposure times for the unprotected skin and eye at specified
distances from the UV lamp, enabling strict compliance with new
EU rules, defined by the Optical Radiation Directive 2006/25/EC.

Options
Power supply requirements:
- 230V/50Hz
- 115V/50Hz
- 60Hz options available
For any questions or queries regarding this product please
contact
us!
Download
the brochure here!
Technical Support
Order Online
NDT Products
|