|
DR-60 CLEANER - REMOVER
MANUFACTURER
: SHERWIN (USA)/NDT Europa (NL)
DISTRIBUTOR: NDT Consultants
Limited (UK)
DESCRIPTION / APPLICATIONS
:
DR 60 is hydrocarbon-based. It is mainly used in the penetrant
process to remove excess penetrant from part surfaces.
DR 60 is also especially suitable for cleaning prior to the
application of penetrants. DR 60 may also be used for generally
cleaning oily, dirty surfaces.
COMPANION PRODUCTS:
Any penetrant.
SPECIFICATIONS :
DR
60 is AMS 2644 listed.
PHYSICAL AND CHEMICAL PROPERTIES
Aspect: : colorless
liquid
Flash Point: +
41°C
Low
in halogens and sulfur.
Compatible with any metal
and ceramics, and many plastics.
PACKAGING/TRANSPORT/STORAGE
:
Packaging:
1, 5, 10, 60 Liter cans.
200 Liter drums.
400 ml spray cans.
Transport / Handling : refer to MSDS (materials safety data sheet)
Storage / Shelf life:
Keep away from moisture
Temperature range : 0 to + 50° C. (32° F to 120° F), if possible lower
than 25°C (80°F)
Keep cans tightly closed.
INSTRUCTIONS
:
1. General Cleaning : spray on
dirty surface, saturating the contaminated area. Let stand 10-30
seconds, allowing organic soils to dissolve. Wipe clean with rag or
toweling before DR 60 dries completely. Repeat if necessary.
2. Penetrant Pre-Cleaning :
normally, Sherwin’s other cleaner-remover, DR 62, is recommended for
penetrant pre-cleaning. However, DR 60 has good pre-cleaning properties
and is suitable for this purpose. Before applying penetrant, follow the
above instructions for using DR 60 as a general cleaner. Make certain
cleaning is sufficient to remove flaw-entrapped as well as surface soils.
Allow DR 60 to evaporate completely from within any flaws before
applying the inspection penetrant.
3. Penetrant Removal : use DR 60
sparingly. Remove as much excess penetrant as possible using clean, dry
rag or toweling. Remove remaining penetrant film by wiping with rag or
toweling that has been slightly moistened with DR 60. Use a minimum of
DR 60, avoid flushing penetrant from flaws. Do not spray DR 60 directly
on part surface when removing excess penetrant. Rough surfaces require
more generous applications of DR 60. Allow surface to dry completely
before applying developer.
HEALTH AND SAFETY
:
refer to MSDS.
The information given herein is given in good faith to our customers for
the sole purpose of assisting them in the use of the products. The
document contains no formal or implicit guarantee regarding its use. NDT
Consultants Limited cannot be held responsible for damages of any nature
resulting from information provided in this document. In addition, none
of the information which the document contains should be interpreted as
a recommendation for the use of the products which would infringe the
protected rights of industrial property.
Download DR-60 Technical Data Sheet
Technical Support
Order Online
For any questions or queries
regarding this product please
contact
us!
Penetrant Testing Products
|
