|
BLACK MAGNETIC DETECTING MEDIUM - B 103
MANUFACTURER:
BABB CO
DISTRIBUTOR:
NDT Consultants Limited (UK)
FEATURES:
Black magnetic detecting medium for detection of surface and subsurface
defects on ferromagnetic parts:
·
High
sensitivity
·
Very
thin powder
·
Shipped in a spray can
COMPANION PRODUCTS:
White background B
104A, Solvent B105
SPECIFICATIONS / STANDARDS:
Can be used with any magnetic testing equipment (including electric
current generators, electromagnets, permanent magnets).
·
RCC-M
code-compliant
·
ASME-code
compliant
·
PMUC
(Produits et Materiels Utilisables en Centtrales, i.e. Products and
Materials that can be Used in Nuclear Plants) product
·
NFF
00-090
PHYSICO-CHEMICAL PROPERTIES:
·
Aliphatic medium with a flash point over +60°C. (+140°F.)
·
Very
thin magnetic powder: 0.5 to 10 µm.
·
Non-chlorinated propellant
·
Halogen and sulphur content below 200 ppm.
PACKAGING / TRANSPORT / STORAGE:
Packaging:
500 ml spray can
Shipping /
Handling:
refer to MSDS .
Storage / Shelf
life:
Keep away from moisture
Temperature limit:
-5 to 50° C. (23 to 130°F.)
Keep packaging
closed after taking out some of the product.
Shelf life: 48
months.
INSTRUCTIONS:
It is recommended to remove any paint, oxide, welding flux, etc. from
the part to be examined as such traces are likely to produce false
indications, and to degrease the part carefully.
Prior application
of the B 104A contrasting white background is strongly recommended. The
contrast with B 103 shall then be enhanced significantly, causing
reading to be easier and detection to be safer.
Once the B 104A is
dry, shake the B 103 can vigorously until the ball tinkles clearly.
Then, spray the B
103 on the area to be examined during magnetization. Let magnetization
on for 1 to 2 seconds after the spray stops, in order for the particles
to come into place properly.
Inspection should
be done under an ordinary white light with a sufficient level (350 lux
minimum recommended or 500 lux, depending on applicable specifications).
HEALTH AND SAFETY:
refer to MSDS.
The information given herein is given in good faith to our customers for
the sole purpose of assisting them in the use of the products. The
document contains no formal or implicit guarantee regarding its use. NDT
Consultants Limited cannot be held responsible for damages of any nature
resulting from information provided in this document. In addition, none
of the information which the document contains should be interpreted as
a recommendation for the use of the products which would infringe the
protected rights of industrial property.
Download B 103 Technical Data Sheet
Technical Support
Order Online
For any questions or queries regarding these products please
contact
us!
NDT Products
|
